EN
OEM Factory Direct: 49% Spandex Stage 2 Post-Op Bodysuit with 4 Steel Bones (BM86634)
The BM86634 is a Stage 2 post‑liposuction full bodysuit built with 49% elastane / 51% polyamide – the highest spandex content in our recovery line. It integrates four flat steel bones (two on the abdomen, two on the back) to prevent rolling and maintain upright posture. The chest zone is detachable and independently adjustable via 3‑row hooks on both shoulders and the chest wall, connected to the abdominal part by buttons. Molded 360° cups protect breast implants or natural bust. The hip area is 3D hand‑cut to enlarge and lift. Length: underbust to knee. Sizes XS‑3XL. Fully customizable for B2B partners.
Description
Clinical application
Designed for the mid‑stage recovery window (15+ days after full torso liposuction). Patients need sustained compression to control residual edema, support skin retraction, and refine body contours, but with more freedom and less overall tightness than Stage 1 garments.
Fabric system
Single high‑performance layer – 49% elastane / 51% polyamide. Stretchability ≥300% (three times ordinary shapewear). This ultra‑high spandex content delivers exceptional recovery force and shape retention even after weeks of daily use.
Breathable construction – The fabric is engineered to wick moisture and allow air circulation, reducing stuffiness during long wear.
Steel bones for structural support
Four flat steel bones are sewn into dedicated channels: two vertically on the front abdomen panel and two on the back panel. They serve three purposes:
- Prevent the garment from rolling or bunching when the patient sits or bends.
- Increase waist and abdominal compression in a targeted manner.
- Encourage a straight spine, reducing post‑operative hunchback.
Independent chest adjustment system
- The chest zone is a separate piece, connected to the abdominal part by durable buttons.
- Both shoulders and both sides of the chest wall have 3 rows of adjustable hooks.
- This allows the wearer to fine‑tune upper body compression independently from abdominal compression. Patients who did not have breast surgery can loosen the chest area while keeping full abdominal pressure – a major comfort upgrade.
3D molded cups
A reinforced cup‑edge support band runs 360° around each cup, preventing upward or lateral displacement of breast implants. The smooth inner surface reduces friction on scars, and the cups maintain their shape through repeated washing.
Hip contouring
The gluteal zone is cut using a 3D hand‑cut pattern that creates extra volume. Instead of flattening the buttocks, the fabric gently lifts and rounds them, producing a “peach butt” silhouette.
Product Specifications
|
Parameter |
Detail |
|
Model |
BM86634 |
|
Garment type |
Full post‑liposuction bodysuit, Stage 2 |
|
Recovery phase |
15+ days post‑op |
|
Length |
Underbust to knee |
|
Material |
49% elastane / 51% polyamide (single high‑performance layer) |
|
Steel bones |
4 flat steel bones (2 front abdomen, 2 back) |
|
Chest system |
Detachable panel, connected by buttons; 3‑row hooks on shoulders and chest sides |
|
Sizes |
XS, S, M, L, XL, 2XL, 3XL (US / Asia / custom) |
|
Colors |
Black, nude, custom |
|
Sample lead time |
5‑7 days |
|
Mass production |
30‑45 days |
|
MOQ (custom) |
50 pieces per color per design |
Key Features & Advantages
Highest spandex content (49%) in this category – Most post‑op garments use 45% or less. The extra 4% translates to higher recovery force, longer shape retention, and better resistance to stretching out over weeks of wear.
Four steel bones prevent rolling – A common complaint with long fajas is the bottom edge curling up. The two abdominal and two back steel bones act as a rigid frame, keeping the garment flat and upright whether the patient stands or sits.
Independent chest‑abdomen adjustment – Because the chest panel is detachable and connected by buttons, a patient can loosen the top without affecting abdominal compression. This is unique: most garments force a single compression level over the entire torso.
360° molded cup with reinforced edge – Designed specifically for patients who had breast augmentation alongside lipo. The cup prevents implant displacement in all directions, and the smooth interior reduces scar irritation.
3D hand‑cut hip zone – Instead of a flat pattern that flattens the glutes, the BM86634 uses a three‑dimensional cut that adds fabric volume exactly where the buttocks need room. The result is a rounded, lifted appearance – a strong selling point for BBL patients or anyone concerned about a flat post‑lipo butt.
Low MOQ (50 pcs) – Clinics, small brands, and distributors can stock a professional Stage 2 garment without taking on large inventory risk.
Logistics & Customization
Logistics – BM86634 is packed in rigid cartons with bone‑protection inserts and cup‑support foam. Standard production 30‑45 days after approval. Ship by sea/air/express to USA, Canada, Mexico, UK, France, Germany. Door‑to‑door or buyer’s forwarder. Customs documents included.
OEM options specific to BM86634:
Bone count: 2, 4, or 6. Spiral steel available.
Chest panel: detachable or fixed. Button or snap connection.
Cup size & support band firmness: customizable to implant volume.
Hip pattern: enlarge or reduce the 3D cut.
Fabric: replace 49% spandex with 45% or add outer Powernet.
Branding: woven labels, silicone logos, hang tags, poly bags.
Grading: US, Asian, European, or Latin American size tables.
Company Qualification
We have manufactured steel‑boned post‑surgical garments for 17 years. Our production records show 4,200+ units of steel‑boned fajas shipped to North America in the past 12 months alone. We hold ISO 9001:2015 certification and operate our own 3D pattern cutting and metal bone insertion lines. The BM86634 is the third iteration of our detachable‑chest platform, refined after two rounds of patient feedback from a Chilean clinic chain. We do not white‑label from a third party – we cut, sew, bone, and pack under one roof. Your purchase order goes directly to our production scheduler.